AIR BLAST FREEZER
- Suitable to freezing aqua-products and food in individuals, powder coated or packed
- Short freezing time, power saving, ensuring quality of products
- Designed and manufactured according to standards of HACCP and FDA
- Walls, floor and ceiling are panels thermal insulated with injected 120mm thick, 40-43 kg/m3 Polyurethane. Both sides of these panels are of stainless steel type 304 , 0,5mm thick that are connected together with camlocks.
- There are three sections, each section is divided into 2 rooms with a 1mm thick stainless steel partition. Each section is equipped with an cooling evaporator. The evaporators are type suitable for NH3, R22 or any new refrigerant.
- The gaps between edges of panels are sealed with low temperature enduring silicons.
- Air blast freezer is equipped with balance valve, dial thermometer, door heaters which are turned off when the outside temperature is of 5o
- The fans are imported from an European country, specialized for freezer.
- Lamps are anti-explosive, sealed.
- The floor and the feet of walls are covered with a 1mm thick stainless sheet metal to prevent water from entering the gaps between floor and walls.
- Inside the floor panels there are reinforce bars to make them strong enough against evaporators' weights.
- The concrete cement foundation for air Blaster is constructed by investor
|
an Air blast freezer |
tray trolley |
|
fan system |
fixed tray shelter |
